Video-GlassPaint

Why should you handle the bottle by the neck only?

The body of the bottle (where you will paint) has been wiped down with rubbing alcohol to remove any oils that may interfere with proper adhesive of the paint to the glass. If you accidentally touch the body of the bottle (where you plan to paint) you will want to wipe down that area with rubbing alcohol first, before applying your stencil/painting.

Weeding Your Stencil(s)

Watch the video below to learn how to weed your stencil(s)


Taping your Stencil(s)

Your kit includes a piece of transfer tape for each stencil. The transfer tape is clear and will be stuck to a piece of waxy paper. Peel the clear tape from the waxy paper and place the tape sticky side down onto your stencil. You do not have to worry about placing the tape perfectly straight onto your stencil, you just want to make sure the tape is covering the image(s) and/or letters on your stencil.

Once you have applied the tape, press down and rub over tape with your fingers to ensure it sticks really well to the stencil.


Applying your Stencil(s)

Watch the video below to learn how to apply your stencil(s) to the bottle(s)


Ensuring it adheres to the glass

After pulling the transfer tape off, portions of your stencil may have lifted away slightly from the glass. If you do not have a good seal between the stencil and the glass, paint will bleed underneath. A small empty ziploc bag has been included with your kit. Slide the bag over your thumb then PRESS down (do NOT rub) over the stencil to ensure it sticks well to the glass. You are using the plastic bag to ensure you do not get oils from your skin onto the glass prior to painting.


Painting your Glass

Please note: the video you are about to watch is a general video which shows how to paint over a stencil. In this video, we are painting over a ceramic tile rather than a glass bottle, but all the steps and procedures are still the same.


If your kit includes a wood component (for example a wooden tray) you will follow the wood staining instructions below. If your kit is comprised of only glass bottle(s), reference your instruction sheet for the next step.

Wood Staining

Put on your GLOVES, then shake the container of WOOD STAIN (labeled “WS”) to thoroughly mix the contents. Your wood stain may have come in a plastic cup, or it may have come in a tube or bottle. Reference the instructions below for your container type:

If your stain came in a cup: Leave it in the bag while you shake, just in case the container leaks. Hold the container by the top & bottom (not the sides) to ensure the lids stays on while you shake. Open the lid slowly to prevent stain from spraying off the lid as you open.

If your stain came in a tube or bottle: after shaking/mixing the stain, pour the stain into the plastic cup provided with your kit. Please note: other kit components may have been packed inside your plastic cup. Remove those items and set them aside so you can use the cup.

To stain your wood, FOLD the stain CLOTH until it is about the size of cotton ball, then dip the cloth into the cup of stain.  Rub the stain onto the wood in the same direction as the wood grain lines.  Reference your instruction sheet for which sides of the wood you should/should not stain.

Wood is like a sponge, it will only absorb so much stain, so you may not need to use all the stain in your cup. Keep in mind that this is stain, not paint, so you should still be able to see the wood through the stain.

When you are done staining you can remove your gloves.